These photos can give you an idea of the installation process for the Brace Kit.

Photo #1

Installed bracket that holds the idler arm

Photo #2

Installing the heim joint over the pitman arm stud.

Photo #3

Idler arm installed

Photo #4

Front view of the assembly

Photo #5

Side view of the assembly

Photo #6

From this photo, you can see why the Cognito idler & pitman arm will last longer. It is no longer allowed to roll forward & back uncontrollably, which is the cause of the excessive wear. You no longer have a change in toe-in, the one factor which causes tires to wear faster than anything else.

Click here to return to the preceding page.

Henderson’s Line-Up
417 S.W. Henderson Lane
Grants Pass, OR 97527

• Phone us at: 541 479-2882
• “800″ Phone: 800-245-8309, Ext 1
• Fax us at: 541-955-6164
• Office Hours: (PST) 8 a.m. - 5 p.m. Mon-Fri; Closed Noon
  to 1 p.m. If you call after hours, we'll call you back.

• If you’re driving & unfamiliar with the area, see a map here

• E-mail us at:

Print|Email

Share this: