SuperSteer^® Bell Crank Steering Control for Chevy/Workhorse P30, P32, G30HD & G3500HD chassis

• Are you “tired” after just a few hours driving?

• Constantly have to fight or work the steering wheel?

• Frustrated with road ruts that pull you off track?

Fix it for good!

• SuperSteer^® replaces fast-
wearing factory bell cranks (idler assemblies) on Chevrolet/Workhorse P30 & P32 motor homes.

• Factory bell crank simple sleeves wear too quickly & allow excessive side
movement. You suffer rut tracking, road wander, steering wheel free play & loss of steering control.

• SuperSteer^® Bell Cranks’ tapered roller bearings tighten steering & help eliminate the side to side movement. You get reduced rut tracking, road wander, and safe relaxed driving.

• You can adjust these bell cranks to re-gain like-new performance.

• Unlike factory units, they’re maintenance-free. We use Amsoil synthetic grease & seal each bell crank to keep out dirt and water.

• Like all SuperSteer^® products, these bell cranks are lifetime warranted as long as you own your coach.

You can have your bell cranks installed by Henderson’s trained technicians OR you can have them shipped to you. If you’d like to order one or get more information, please phone toll-free 888-898-3281 & order from our SuperSteer^® Division. You can also E-mail SuperSteer^® at sales@superstop.com here.

If you’d like an appointment to have your own SuperSteer^® installed, just call -

Henderson’s Line-Up
417 S.W. Henderson Lane
Grants Pass, OR 97527

• Phone us at: 541 479-2882
• “800″ Phone: 800-245-8309, Ext 1
• Fax us at: 541-955-6164
• Office Hours: (PST) 8 a.m. - 5 p.m. Mon-Fri; Closed Noon
  to 1 p.m. If you call after hours, we'll call you back.

• If you’re driving & unfamiliar with the area, see a map here

• E-mail us at:

Print|Email

Share this: